Best Practices to Optimize & Validate Vision Systems
Trust, Confidence, Performance
Join us for a joint discussion about testing and metrology for machine vision systems with Imatest, LLC. Confidence in your application starts with trust in the performance of your system. Vision systems require accurate and precise testing and calibration of lenses, cameras, and several other key components.
Have Confidence in the Performance of Your Vision System
We invite you to join this 45-minute webinar presented by Nick Sischka, Director of Imaging Product Development, at Edmund Optics, and Henry Koren, Chief Product Officer, at Imatest, LLC. At the end of this webinar, participants will have a strong understanding of:
Key nomenclature and terminology for imaging system metrology
The ways in which each component of a machine vision system and the system as a whole, are tested
How to use lens and camera metrology equipment with software to ensure system performance
Nicholas Sischka Director, Imaging Product Development
Nick Sischka is the Director of Imaging Product Development at Edmund Optics’ Cherry Hill, NJ, USA office. Specializing in optics for vision systems, Nick supports imaging and machine vision customers with application knowledge and design assistance for modification or customization requirements. Additionally, Nick serves as the A3 (Association for Advancing Automation) NextGen Chair and teaches on the A3 Education Committee. He holds a B.S in Optical Sciences and Engineering from the University of Arizona.
Henry Koren Chief Product Officer, Imatest
Henry Koren has 25 years of experience in software engineering. For the last 18 years, Henry has worked to develop Imatest into a global leader in digital image quality analysis. Henry was responsible for integrating Imatest image quality analysis with high-volume manufacturing systems, where he learned about supply chain management and the challenge of maintaining high standards of image quality without sacrificing yield. In addition, Henry has worked to develop image quality testing standards as chair of the IEEE 1858 Camera Phone Image Quality (CPIQ) working group and IEEE Liaison with the ISO TC42/WG18 committee. At Imatest, Henry serves as Chief Product Officer, where he has helped expand solutions for testing camera systems with long-range, high resolution, high dynamic range, and wide fields of view.
Thank you for requesting our most recent webinar. We will email you a link to the recording.
or view regional numbers
enter stock numbers to begin
Copyright 2021 | Edmund Optics, Ltd Unit 1, Opus Avenue, Nether Poppleton, York, YO26 6BL, UK
Edmund Optics GmbH Germany acts as an agent for Edmund Optics Ltd. UK. The contract partner is Edmund Optics Ltd. UK.