TECHSPEC® Cage System Linear Translation Assemblies are used to add linear translation to a TECHSPEC Optical Cage System setup. The built-in translation assembly enables coarse positioning along the cage rods. Once fixed to the cage rods, fine translation can be done using a micrometer drive. By adding additional springs and replacing the 3mm x 50mm rods (#85-470) with two 3mm x 75mm (#86-847, sold separately), the ½" standard travel can be extended to 1". TECHSPEC Cage System Linear Translation Assemblies are available in two options: simple translation utilizes 6mm rods and standard plates, while ball bearing translation utilizes ball bearing slides for low-friction translation.
Note: Micrometer/drive mechanism and 6mm Support Rods sold separately.
Components for Simple Translation Assembly | |||
Description | Quantity | Feature | Stock No. |
Micrometer Mount Kit | 1 Required | Micrometer Holder | #85-618 |
Protective Steel Plate | |||
#86-838 Compression Springs (2pk) | |||
25mm Standard Cage Plate, M6 | 2 Required* | One plate is used for travel and second plate is fixed | #85-632 |
30mm Standard Cage Plate, M6 | #85-630 | ||
25mm Standard Cage Plate, ¼-20 | #85-633 | ||
30mm Standard Cage Plate, ¼-20 | #85-631 | ||
Micrometer or Actuator | 1 Required | Choose based on type, travel, and graduation | Customer Selected |
Shaft Collar (2pk) | 1 Optional | Can be used instead of a fixed plate | #86-845 |
Compression Springs (2pk) | 1 Optional | Used to extend travel range to 1" | #86-838 |
*Note: Only 1 required if Shaft Collars are used.
Components for Ball Bearing Translation Assembly | |||
Description | Quantity | Feature | Stock No. |
Translation Assembly Kit | 1 Required | #85-618 Micrometer Mount Kit | #86-847 |
#85-620 Travel Bearing Plate | |||
#85-619 Fixed Bearing Plate | |||
#85-686 Linear Bearing Bushings (2pk) | |||
#85-471 3mm Dia x 75mm Length Rod (x2) | |||
Micrometer or Actuator | 1 Required | Choose based on type, travel, and graduation | Customer Selected |
Compression Springs (2pk) | 1 Optional | Used to extend travel range to 1" | #86-838 |
Compatible Micrometers | |||
Type | Travel | Graduation | Stock No. |
Micrometer Drive | 0.5" | 0.001" | #58-660 |
Micrometer Drive | 25mm | 0.01mm | #58-663 |
or view regional numbers
QUOTE TOOL
enter stock numbers to begin
Copyright 2021 | Edmund Optics, Ltd Unit 1, Opus Avenue, Nether Poppleton, York, YO26 6BL, UK
Edmund Optics GmbH Germany acts as an agent for Edmund Optics Ltd. UK. The contract partner is Edmund Optics Ltd. UK.